Family isn't everything. It's the only thing.
The V-12 Family of products are strong. They are used by printers that have inks and coatings that are consistently difficult to remove. They are often used by printers who are not able to clean every day, and need a solution that can penetrate deeply and quickly. V-12 is a high pH product. V-12 TURBO is a high pH product with solvent added to speed up cleaning. V-12 TURBO low pH is the soft metal safe version of V-12 TURBO.
|Product Name||V-12 Original Formula||V-12 Turbo||V-12 Turbo Low-pH|
|Appearance and Odor||Blue Liquid, Mild Detergent Characteristic Odor||Yellow Green, Mild Detergent Characteristic Odor||Yellow Green, Mild Detergent Characteristic Odor|
|pH (Concentrate/1% Solution) (+/- 0.5)||12.8 / 12.2||12.5||10.00 / 9.5-10|
|Density||8.53 (lbs/gal)||11.099 (1.33 g/cm3)||11.099 (1.33 g/cm3)|
|Foaming Properties||Moderate to Low||Moderate to Low||Moderate to Low|
- Ceramic and Chrome Anilox rolls
- Rubber and photopolymer plates
- Rubber Rollers
- Press frames and interior components
- Ink pumps and their drain systems
- All areas of your Printing environment
V-12 is a Two-Part Cleaner. V-12 is an ultra concentrated chemical and contains almost no water. A Full Kit of V-12 contains 1 box of PART A (5 gallons) and 1 box Part B (5 gallons). Part A and Part B are mixed with water at your Flexographic Printing Facility in standard container sizes (5 gallon pails, 55 gallon drums and 275 gallon tote bins).